Yeastar Technology TG400G User Manual Download

Page: 92 / 104

TG Series User Guide

92/104

(

Optional

) Change the e-mail subject and the e-mail template.

Click

Save

and

Apply Changes

Upload Certificate Files

You can create TLS VoIP trunks and accounts on TG gateway. To make the TLS trunks or accounts
work, you need to upload certificates to TG gateway.

If you have enabled

TLS Verify Client

(Gateway > VoIP Settings > SIP Settings), you need to upload

the TLS certificates on TG gateway.

Procedure

Navigate to

Settings > System > Security > Certificates

to upload your certificates.

Upload trusted certificate.

Trusted certificate is a CA certificate. The connected PBX should upload the same certificate.

Click

Upload Certificate

, choose

Type

Trusted Certificate

Click

Browse

to select the file from your local PC.

Click

Save

to start uploading.

You can see the certificate appear on

Trusted Certificate

list.

Upload gateway certificate.

Gateway certificate is made for the TG gateway.

Click

Upload Certificate

, choose

Type

Gateway Certificate

Click

Browse

to select the file from your local PC.

Click

Save

to start uploading.

You can see the certificate appear on

Gateway Certificate

list.

Reboot the TG gateway to take effect.

Configure Firewall Rules

You can configure firewall rules for the TG gateway to protect the system from attacking.

Important: back up the system configuration before you start configuring firewall in case you may be
unable to log in the system with improper firewall configurations.

Summary of Contents for TG400G









































































































Search results

Summary of Contents for TG400G

Reviews:

Related manuals for TG400G

Brands by name

Popular brands

Yeastar Technology TG400G, User Manual

Search results

Summary of Contents for TG400G

Reviews:

Related manuals for TG400G

Brands by name

Popular brands