TB200/400 User Manual
32/39
Figure 4-15 T.38
Table 4-10 Description of T.38 Settings
Items
Description
Re-invite SDP Not Add T.38
Attributes
If set to Yes, SDP in re-invite packet will not add T.38
attributes.
Error Correction
Re-invite SDP T38FaxUdpEc.
T.38 Max Bit Rate
Set T38 Max Bit Rate.
6) Advanced Settings
Figure 4-16 Advanced Settings
Table 4-11 Description of Advanced Settings
Items
Description
From Field
Where to get the caller ID in SIP packet.
To Field
Where to get the DID in SIP packet.
180 Ringing
It is set when the telecom provider needs. Usually it is not
needed.
Remote Party ID
Whether to send Remote-Party-ID on SIP header or not.
Default: no.
Allow Guest
Whether to allow anonymous registration extension or not.
Default: no. It’s recommended that it is disabled for security
reason.
Pedantic
Enable pedantic parameter. Default: no.
Alwaysauthreject
If enabled, when TB200/400 rejects “Register” or “Invite”
packets,
TB200/400
always respond the packets
using “SIP404 NOT FOUND”. It’s recommended that it is
enabled for security reason.