TA100/200 User Manual
43/52
Figure 10-2 Date and Time
Time Zone
Select your current and correct time zone on TA100/200.
Daylight Saving Time
The option is disabled by default. Enable it when necessary.
Automatically Synchronize with an Internet Time Server
TA100/200 will adjust its internal clock to a central network server. Please
note the TA100/200 should be able to access to the Internet if you choose this
method.
Set Date & Time Manually
Enter the time using the numbers on your keyboard.
Note:
you have to reboot the system to make the changes take effect.
Auto Provision Settings
Three methods are supported for Auto Provision: PNP, DHCP and you can manually
configure a server URL to get the configuration file from the server. Go to
System→System Preferences→Auto Provision Settings
to configure.
Figure 10-3 Auto Provision Methods
PNP
and
DHCP
modes work along with MyPBX "TA Provisioning". Firstly, users need
to configure TA100/200 on MyPBX "TA Provisioning" page. Then TA100/200 will find
and get the configuration file from MyPBX during boots up.
In
PNP
mode, you just need to place the TA100/200 in the same IP range network
with MyPBX, then you can find the TA100/200 and provision it on MyPBX
”TA
Provisioning” page.
