TA100/200 User Manual
33/52
VLAN Settings
VLAN (Virtual Local Area Network) is a group of hosts with a common set of
requirements, which communicate as if they were attached to the same broadcast
domain, regardless of their physical location.
A VLAN is a broadcast domain created by switches. This means the VLAN is
configured on switches, layer 3 switches. Note that some of the switches don’t
support VLAN.
Note:
TA100/200 acts as a VLAN client, a 3-layer switch is needed.
Figure 8-5 VLAN Settings
Please follow the steps below to set up VLAN on TA100/200.
Step1
. Create VLANs on your switch.
Step2
. Allocate a VLAN ID and IP address for TA100/200.
Step3
. Configure VLAN settings page on TA100/200.
VPN Settings
A virtual private network (VPN) is a method of computer networking typically using the
public internet that allows users to privately share information between remote
locations, or between a remote location and a business' home network. A VPN can
provide secure information transport by authenticating users, and encrypting data to
prevent unauthorized persons from reading the information transmitted. The VPN can
be used to send any kind of network traffic securely. TA100/200 supports OpenVPN.
