S-Series IP PBX Administrator Guide
67
Table 7-7 Call Back Configuration Parameters
Option
Description
Name
Give this Callback a brief name to help you identify it.
Callback Through
Choose a trunk, the call will be called back through the selected trunk.
Delay Before Callback
Set the number of seconds before calling back a caller.
Strip
Defines how many digits will be stripped from the call in number before
the callback is placed.
Prepend
Defines digits added before a callback number before the callback is
placed.
Destination
The destination which the callback will direct the caller to.
DISA
DISA (Direct Inward System Access) allows someone calling in from outside Yeastar S-Series to
obtain an “internal” system dial tone and make calls as if they were using one of the extensions of
S-Series.
To use DISA, a user calls a DISA number, which invokes the DISA application. The DISA application
in turn requires the user to enter a PIN number, followed by the pound key (#). If the PIN number is
correct, the user will hear dial tone on which a call may be placed.
Please check the callback configuration parameters below.
Figure 7-8 Add DISA
Table 7-8 DISA Configuration Parameters
Option
Description
Name
Give this DISA a brief name to help you identify it.
