TG100 User Guide
66/75
Upload Certificate Files
You can create TLS VoIP trunks and accounts on TG gateway. To make the TLS
trunks or accounts work, you need to upload certificates to TG gateway.
If you have enabled
TLS Verify Client
(Gateway > VoIP Settings > SIP Settings), you
need to upload the TLS certificates on TG gateway.
Procedure
1.
Navigate to
System
>
Security Center
>
Certificates
to upload your certificates.
2.
Upload trusted certificate.
Trusted certificate is a CA certificate. The connected PBX should upload the same
certificate.
a.
Click
Upload Certificate
, set
Type
to
Trusted Certificate
.
b.
Click
Choose File
to select the file from your local PC.
c.
Click
Save
to start uploading.
You can see the certificate appear on
Trusted Certificate
list.
3.
Upload gateway certificate.
Gateway certificate is made for the TG gateway.
a.
Click
Upload Certificate
, set
Type
to
Gateway Certificate
.
b.
Click
Choose File
to select the file from your local PC.
c.
Click
Save
to start uploading.
You can see the certificate appear on
Gateway Certificate
list.
4.
Reboot the TG gateway to take effect.
Configure Firewall Rules
You can configure firewall rules for the TG gateway to protect the system from being
attacked.
Important
: Back up the system configuration before you start configuring firewall, or
you may fail to log in the system with improper firewall configurations.
Add a Firewall Rule
Procedure
1.
Navigate to
System
>
Security Center
>
Firewall Rules
, click
Add Rule
.
2.
Set a
Name
for the rule.
3.
(
Optional
) Enter notes for the rule in the
Description
field.
4.
Choose the desired
Protocol
.
5.
Enter a port range in
Port
fields. The end port must be equal to or greater than
start port. If you want to set the rule for a specific port, enter the same port value in
the two
Port
fields. For example, 5060:5060 stands for port 5060.
