TA410/810 User Manual
20/63
SIP Settings
It is wise to leave the default setting as provided on this page. However, for a few
fields, you need to change them to suit your situation.
1) General
Figure 4-6 SIP General Settings
Table 4-4 Description of SIP General Settings
Items
Description
UDP Port
Port used for SIP registrations. The default is 5060.
Enable Random Port
Enable or Disable Random SIP port.
Random Port Update
Interval
Set the Random Port Update Interval.
TCP Port
Port used for SIP registrations. The default is 5060.
TLS Port
Port used for SIP registrations. The default is 5061.
TLS Verify Server
When using TA FXO Gateway as a TLS client, whether
or not to verify server’s certificate. It is “No” by default.
TLS Verify Client
When using TA FXO Gateway as a TLS server, whether
or not to verify client’s certificate. It is “No” by default.
TLS Ignore Common
Name
Set this parameter as “No”, then common name must be
the same with IP or domain name.
TLS Client Method
When using TA FXO Gateway as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
RTP Port Start
Beginning of the RTP port range.
RTP Port End
End of the RTP port range.
DTMF Mode
Set the default mode for sending DTMF. Default setting:
Summary of Contents for NeoGate TA810
Page 10: ...TA410 810 User Manual 10 63 Figure 2 3 Connect TA FXO Gateway and FXS Gateway...
Page 16: ...TA410 810 User Manual 16 63 Figure 3 4 Port Group...
Page 32: ...TA410 810 User Manual 32 63 Figure 5 6 Callback Settings...
Page 58: ...TA410 810 User Manual 58 63 Figure 11 12 Reset and Reboot...
