TA410/810 User Manual
19/63
Figure 4-4 Service Provider Trunk Settings
Table 4-3 Description of Service Provider Trunk Settings
Items
Description
Trunk Type
Choose the type of trunk, “Service Provider”.
Provider Name
A unique label to help you identify this trunk when
listed in outbound rules, incoming rules etc. E.g.
“yeastar”.
Hostname/IP
Service provider’s hostname or IP address.
Note:
5060 is the standard port number used by SIP
protocol. Don’t change this part if it is not required.
Trunk Group
Trunk group is a feature that allows you to define specific SIP trunks to a group. A
trunk group can be used in a route. When a call is coming or going through the route,
an available trunk would be selected in the trunk group.
Figure 4-5 Trunk Group
Summary of Contents for NeoGate TA810
Page 10: ...TA410 810 User Manual 10 63 Figure 2 3 Connect TA FXO Gateway and FXS Gateway...
Page 16: ...TA410 810 User Manual 16 63 Figure 3 4 Port Group...
Page 32: ...TA410 810 User Manual 32 63 Figure 5 6 Callback Settings...
Page 58: ...TA410 810 User Manual 58 63 Figure 11 12 Reset and Reboot...
