FXS Gateway TA400/800 User Manual
Part II. Basic Operations
Here are instructions about how to operate on analog phones connected to TA FXS
Gateway to use some features.
1. TA FXS Gateway Voice Menu
TA FXS Gateway provides a voice menu to guide you to configure the network
settings for the device. You need to press *** on the analog phone which is connected
to TA FXS Gateway’s FXS port to enter the voice menu.
The default password to enter “Advanced Settings” is 123456. You can change the
password on TA FXS Gateway Web page.(Gateway
→
Gateway Settings
→
Feature
Codes
→
Voice Menu Password Settings)
Tips:
1. “9” listen to the prompt again.
2. “*” returns to the last menu.
2. Inter-port Call
TA FXS Gateway supports inter-port calls between the phones which are connected
to FXS ports of TA FXS Gateway. Achieve it by simply pressing the "Internal Call
Extra" feature code (default *99) + the FXS port number on the phone.
Note: You need add digit 0 before the FXS port number if the port number is between
1 and 9.
For example, to make a call from the phone which is connected to TA FXS Gateway
56/59
