MyPBX Standard Administrator Guide
79
Disable Business Hours
: the calls will always be routed to the
“Day Destination”.
Day/Night Control
This feature enables designated users (usually the company operator or receptionist)
to override the normal routing of calls based on the time of day. For example, the
system may be configured to direct calls during office hours directly to the receptionist
and to route calls to voice menu after hours. Using the day/night control, the
receptionist can override this time settings and force all calls to follow the setting as if
the office were closed. This override is usually used if the receptionist needs to be
away unexpectedly or if the office needs to close due to poor weather.
Figure 16-3 Day/Night Control
Force to Night Mode (*81)
The system starts in day. To switch to night mode, dial the feature code *81. All
incoming callers will now be directed to the
“Night Destination”.
Force to Day Mode (*82)
D
ial *82 to switch to day mode (office open mode), allcalls will go to “Day
D
estination”.
Revert to the Original Mode (*081)
Dial *081 to revert to the original mode, calls willgo to the relevant destinations
according to the office time.
Time Groups
Time Group is used to define periods of time that can then be selected in the Inbound
Time Conditions or Outbound Routes.
