MyPBX Standard Administrator Guide
99
Alert Settings
After enabling this feature, phone notification or email notification will be sent to users
if the system has been attacked via IP or Web.
Figure 19-11 Alert Settings
IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto IP
Blacklist and notify the user if it match the protection rule.
WEBLOGIN
Web Login Alert Notification: enter the incorrect password consecutively for five
times will be considered as an attack, the system will limit the IP login within 10
minutes and notify the user.
1) Phone Notification Settings
Table 19-5 Description of Phone Notification Settings
Items
Description
Number
The numbers could be set for alert notification; users can setup
multiple extension and outbound phone numbers. Please
separate them by
“;”.
Example:
“500;9911”, if the extension has configured Follow Me
Settings, the call would go to the forwarded number directly.
Attempts
The attempts to dial a phone number when there is no answer.
Interval
The interval between each attempt to dial the phone number.
Must be greater than 3 seconds, the default value is 10 seconds.
Prompt
Users will hear the prompt while receiving the phone notification.
2) Email Notification Settings
Please ensure that all voicemail settings are properly configured on the
PBX→Basic Settings→Voicemail Settings
page before using this feature.
Table 19-6 Description of Email Notification Settings
Items
Description
Recipient’s Name
The recipients for the alert notification, and multiple email
addresses are allowed, please separate them by
“;”.
Example:[email protected];[email protected],
Subject
The subject of the alert email.
