Yealink Zoom Rooms CP960-UVC, Deployment Manual

Page: 26 / 41

| Using CP960 as Zoom Rooms Controller | 26
Procedure
1. During a meeting, tap Camera Control .
2.
Tap / to zoom camera out/in.
3. Tap the arrow keys to pan/tilt the camera.
4. Long tap Preset1 / Preset2 / Preset3 to create a new preset.
5. If the Lock Settings is enabled, enter the room passcode.
6. Long tap the corresponding preset and then select Save position .
Resetting the Preset Position for UVC30
Procedure
1.
During a meeting, tap
Camera Control
.
2.
Tap / to zoom camera out/in.
3.
Tap the arrow keys to pan/tilt the camera.
4.
Long tap
Preset1
/
Preset2
/
Preset3
to reset the preset.
5.
If the
Lock Settings
is enabled, enter the room passcode.
6.
Long tap the corresponding preset and then select
Save position
.
Renaming the Preset Position for UVC30
Procedure
1.
During a meeting, tap Camera Control .
2.
Long tap Preset1 / Preset2 / Preset3 to rename the preset.
3.
If the Lock Settings is enabled, enter the room passcode.
4.
Long tap the corresponding preset and then select Rename .
5.
Enter the new name.
6.
Tap OK .
Setting UVC30 Camera to Preset Position