Yealink Yealink SIP-T48G, User Manual

Page: 38 / 105

XML Browser Developer’s Guide for Yealink IP Phones
30
For SIP-T46G/T42G/T41P/T29G/T27P/T23P/T23G/T21(P) E2/T19(P) E2 IP phones:
SoftKey Index Label URI
1 Submit SoftKey:Submit
2 2aB SoftKey:ChangeMode
3 BackSpace SoftKey:BackSpace
4 Dot (.) SoftKey:Dot
5 NextSpace SoftKey:NextSpace
6 Exit SoftKey:Exit
For SIP-T48G IP phones:
SoftKey Index Label URI
1 2aB SoftKey:ChangeMode
2 BackSpace SoftKey:BackSpace
3 Dot (.) SoftKey:Dot
4 NextSpace SoftKey:NextSpace
5 Submit SoftKey:Submit
The function keys and soft keys are listed in the following table:
Key Name Operation Function
Up/Down
Key
Pressing the
up/down keys
Browse the input box up and down.
Left/Right
Key
Pressing the Left
/right keys
Move the cursor left and right.
Keypad
Pressing the digit
keys 1~9, * and #
keys
If the value of the LockIn is “no” and the
value of the “editable” is "yes", then input
character; otherwise no response.
BackSpace
Pressing the
BackSpace soft key
Delete the character before the cursor in the
input box.
Dot (.)
Pressing the Dot soft
key
Input a “.” in the input box at the cursor
position.
Submit
Pressing the Submit
soft key
Execute the command comprised of the URI
and input content.
Exit
Pressing the Exit soft
key/Taping
(only for SIP-T48G IP
Exit from the current XML screen.