| Audio Settings |
63
Setting the Ring Tone for the External Calls
You can select a unique ring tone for the external calls so that you can identify callers when the phone
rings.
Procedure
1.
Go to
OK
>
Settings
>
Audio
>
Ring Tones
>
Melodies
.
On the CP930W, go to
Menu
>
Settings
>
Basic Settings
>
Sound
>
Ring Tones
.
On the DD phone, go to
Menu
>
Settings
>
Basic Settings
>
Sound
>
Ring Tones
>
Common
.
2.
Select the desired ring tone.
The ring tone is played automatically.
3.
Confirm the action.
Setting the Advisory Tone
Advisory tones are the acoustic signals of your handset, which inform you of different actions and states. It
is not applicable to DD phones.
About this task
You can configure the following advisory tones independently:
•
Keypad Tone
: plays when you press any key on the keypad.
•
Touch Tone
: plays when you tap the keys (except the touch keypad). It is only applicable to CP930W.
•
Confirmation
: plays when a setting is changed or the handset is placed in the charger cradle.
•
Low Battery
: plays when the battery's remaining capacity is low and the handset needs charging.
Note:
If the silent mode is activated, the advisory tones will not play, but you can still see the
alert of low battery on the phone screen.
Procedure
1.
Go to
OK
>
Settings
>
Audio
>
Advisory Tones
.
On the CP930W, go to
Menu
>
Settings
>
Basic Settings
>
Sound
>
Advisory Tones
.
2.
Select the desired value from the
Keypad Tone
field.
3.
On the CP930W, select the desired value from the
Touch Tone
field.
4.
Select the desired value from the
Confirmation
field.
5.
Select the desired value from the
Low Battery
field.
6.
Confirm the action.
Setting the Vibrator
By default, the phone simultaneously vibrates and rings when receiving an incoming call.
About this task
It is only applicable to W59R.
The following vibration settings are available for the incoming call:
•
Vibrate and Ring
: The handset will simultaneously ring and vibrate.
•
Vibrate
: The handset will vibrate only.
