Yealink W80 Administrator'S Manual Download Page 160

Page: 160 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System

157

Description

It configures the access URL of the DST file (AutoDST.xml).

Note

: It works only if "local_time.summer_time" is set to 2 (Automatic).

Permitted
Values

URL within 511 characters

Default

Blank

Time and Date Manually Configuration

You can set the time and date manually when the phones cannot obtain the time and date from the NTP time
server.

The following table lists the parameter you can use to configure time and date manually.

Parameter

local_time.manual_time_enable

<y0000000000xx>.cfg

Description

It enables or disables the phone to obtain time and date from manual settings.

Permitted
Values

-Disabled, the phone obtains time and date from the NTP server.

-Enabled

Default

Web UI

Settings > Time&Date > Manual Time

Note: After the device reboots, it will be forcibly switched to obtain the time and date from the NTP server.

Time and Date Format Configuration

You can customize the time and date by choosing between a variety of time and date formats, including options to
date format with the day, month, or year, and time format in 12 hours or 24 hours, or you can also custom the date
format as required.

The following table lists the parameters you can use to configure time and date format.

Parameter

custom.handset.time_format

<y0000000000xx>.cfg

Description

It configures the time format for all registered handsets.

Note:

It works only if “static.auto_provision.handset_configured.enable” is set to 1 (Enabled).

Permitted
Values

-Hour 12, the time will be displayed in 12-hour format with AM or PM specified.

-Hour 24, the time will be displayed in 24-hour format (for example, 2:00 PM displays as 14:00).

Default

Web UI

Settings > Time&Date > Time Format

Handset UI

OK > Settings > Display > Time Format

Parameter

custom.handset.date_format

<y0000000000xx>.cfg

Description

It configures the date format for all registered handsets.

Note

: The value configured by the parameter “lcl.datetime.date.format” takes precedence over that

configured by this parameter.

Permitted
Values

-WWW MMM DD

-DD-MMM-YY

-YYYY-MM-DD

Summary of Contents for W80





































































































































































































































































Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands

Yealink W80, Administrator'S Manual

Search results

Summary of Contents for W80

Reviews:

Related manuals for W80

Brands by name

Popular brands