| Customizing Your Phone |
67
3.
Select the desired value from the
In Charger
or
Out Of Charger
field.
On the CP930W, select the desired value from the
Time in Charger
field.
4.
Confirm the action.
Changing the DD Phone Brightness
You can configure the backlight to adjust the brightness of the phone screen. Backlight status on the phone
screen can be configured from the following options:
•
Always On
: Backlight is on permanently.
•
Always Off
: Backlight is off permanently.
•
15s
,
30s
,
1min
,
2min
,
5min
,
10min
, or
30min
: Backlight is turned off when the phone is inactive after
the designated time (in seconds).
Procedure
1.
Go to
Menu
>
Settings
>
Basic Settings
>
Display
>
Backlight
.
2.
Select the desired time from the
Backlight Time
field.
3.
Confirm the action.
Setting the Keypad Light
You can enable the keypad light to illuminate the keypad keys when any key is pressed.
About this task
It is only applicable to W56H/W53H.
Procedure
1.
Go to
OK
>
Settings
>
Display
>
Keypad LED
.
2.
Press
Change
to select the
Keypad LED
check box (the default status is checked).
Changing the Language
Your phone supports several languages that you can choose to use on the phone.
Before you begin
Contact your system administrator to find out exactly which languages are supported on your phone.
Procedure
1.
Go to
OK
>
Settings
>
Language
.
On the CP930W/DD phone, go to
Menu
>
Settings
>
Basic Settings
>
Language
.
2.
Select the desired language.
The phone prompts you whether to change the language.
3.
Confirm the action.
The phone language is changed to the selected one.
Summary of Contents for W78H
