| Bluetooth |
42
•
Low Battery
: plays when the battery's remaining capacity is low and the handset needs charging.
Note:
If the silent mode is activated, the advisory tones will not play, but you can still see the alert of low
battery on the phone screen.
1.
Go to
OK
>
Settings
>
Audio
>
Advisory Tones
.
2.
Select the desired value from the
Keypad Tone
field.
3.
Select the desired value from the
Confirmation
field.
4.
Select the desired value from the
Low Battery
field.
5.
Confirm the action.
Setting the Vibrator
By default, the phone simultaneously vibrates and rings when receiving an incoming call.
The following vibration settings are available for the incoming call:
•
Vibrate and Ring
: The handset will simultaneously ring and vibrate.
•
Vibrate
: The handset will vibrate only.
•
Vibrate then Ring
: The handset will vibrate four times and then start ringing.
•
Off
Note:
If the silent mode is activated, the handset will not vibrate and ring.
1.
Go to
OK
>
Settings
>
Audio
>
Vibrator
.
2.
Select the desired method.
Disabling the Noise Cancellation
Noise cancellation helps improve intelligibility of speech in noisy environments. You are allowed to disable it.
1.
Go to
OK
>
Settings
>
Audio
>
Noise Cancellation
.
2.
Disable the noise cancellation.
3.
Confirm the action.
Bluetooth
The W59R handset can be used with a Bluetooth headset. By default, the Bluetooth feature is disabled. To be able to
use Bluetooth, it must be enabled.
For a list of supported Bluetooth headsets, refer to
Appendix C - Bluetooth Headset Compatibility List
Enabling / Disabling the Bluetooth
1.
Go to
OK
>
Settings
>
Bluetooth
.
2.
Select
Enabled
/
Disabled
from the
Bluetooth
field.
3.
Confirm the action.
Pairing Devices
Summary of Contents for W59R
Page 1: ......
Page 45: ... Appendix 45 Appendix Appendix A Menu Structure ...
