Yealink W56H
IP DECT Phone
Quick Reference User Guide
Page 4 | Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
ACCESS VOICEMAIL
1. Press
.
2. When prompted, enter
PIN-Code
and press
.
•
For new messages, press
.
•
For saved messages, press .
•
For advanced voicemail settings, press .
PLACE CALL ON HOLD/RESUME A CALL
To place a call on hold:
•
Press the
Options
soft key during a call, and select
Hold.
To resume a call, do one of the following:
•
If only one call is on hold, press the
Resume
soft key.
•
If there are two calls on hold, press the
Resume
soft key to resume the current call. Press the
Swap
soft key to swap between calls.
TRANSFER A CALL
Blind Transfer - The call is transferred directly without the need to announce the caller:
•
Press the
Options
soft key during a call, and select
Transfer.
•
Enter the number you wish to transfer the call to.
•
Press the
Transfer
soft key.
Attended Transfer - Allows you to announce the caller prior to releasing the call
•
Press the
Options
soft key during a call, and select
Transfer.
•
Enter the number you wish to transfer the call to.
•
Press
, or
to dial out.
•
Press
Transfer
when the call is answered.
ENABLE CALL FORWARD
To enable Call Forward on a specific line:
•
Press the
OK
key to enter the main menu, and select Call Features > Call Forward.
•
Press or to highlight the desired line, and press the
OK
soft key.
•
Press or to highlight the desired forwarding type, and press the
OK
soft key.
•
Always----Incoming calls are forwarded immediately.
•
Busy----Incoming calls are forwarded when the line is busy.
•
No Answer----Incoming calls are forwarded if not answered after a period of time.
•
Select
Enabled
from the
Status
field.
•
Enter number to forward to in the
Target
field and press the
Save
soft key to accpet the change.
How to (cont...):
