Yealink W53P Administrator'S Manual Download Page 251

Page: 251 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones

244

Reproduce the issue.

Click

Stop

in the

Export All Diagnostic Files

field to stop the capture.

The system log level will be reset to 3.

Click

Export

to open the file download window, and then save the diagnostic file to your local system.

A diagnostic file named

allconfig.tgz

is successfully exported to your local system.

Phone Status

Available information on phone status includes:

Base station status (IPv4 status or IPv6 status, firmware version, MAC address and device certificate status, RFPI and

network information).

Handset status (handset model, hardware version, firmware version, IPUI code, SN code and area).

Line status

Topic

Viewing the Phone Status

Viewing the Phone Status

You can view phone status via handset user interface by navigating to OK->Status

You can also view the phone status via the web user interface.

Procedure

Open a web browser on your computer.

Enter the IP address in the browser’s address bar, and then press the

Enter

key.

For example, “http://192.168.0.10” for IPv4 or “http://[2005:1:1:1:215:65ff:fe64:6e0a]” for IPv6.

Enter the user name (admin) and password (admin) in the login page.

Click

Login

to log in.

The phone status is displayed on the first page of the web user interface.

Phone Reboot

You can reboot the IP phone remotely or locally.

Topics

Rebooting the IP Phone Remotely

Rebooting the IP Phone via Handset User Interface

Rebooting the IP Phone via Web User Interface

Rebooting the IP Phone Remotely

You can reboot the IP phones remotely using a SIP NOTIFY message with “Event: check-sync” header. Whether the IP

phone reboots or not depends on “sip.notify_reboot_enable”. If the value is set to 1, or the value is set to 0 and the

header of the SIP NOTIFY message contains an additional string “reboot=true”, the IP phone will reboot immediately.

The NOTIFY message is formed as shown:

NOTIFY sip:<user>@<dsthost> SIP/2.0

To: sip:<user>@<dsthost>

Summary of Contents for W53P









































































































































































































































































Search results

Summary of Contents for W53P

Reviews:

Related manuals for W53P

Brands by name

Popular brands

Yealink W53P, Administrator'S Manual

Search results

Summary of Contents for W53P

Reviews:

Related manuals for W53P

Brands by name

Popular brands