Yealink W53P Administrator'S Manual Download Page 163

Page: 163 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones

156

DD Phone

Menu->Features->Call Forward->AccountX->No Answer Forward->After Ring Time

Parameter

account.X.timeout_fwd.on_code

[1]

<MAC>.cfg

Description

It configures the no answer forward on code to activate the server-side no answer forward feature.

The IP phone will send the no answer forward on code and the pre-configured destination number (con-

figured by the parameter “account.X.timeout_fwd.target”) to the server when you activate no answer for-

ward feature on the IP phone.

Note:

It works only if “features.fwd.allow” is set to 1 (Enabled)。

Permitted

Values

String within 32 characters

Default

Blank

Web UI

Features->Forward&DND->Forward->AccountX->No Answer Forward->On Code

Parameter

account.X.timeout_fwd.off_code

[1]

<MAC>.cfg

Description

It configures the no answer forward off code to deactivate the server-side no answer forward feature.

The IP phone will send the no answer forward off code to the server when you deactivate no answer for-

ward feature on the IP phone.

Note:

It works only if “features.fwd.allow” is set to 1 (Enabled).

Permitted

Values

String within 32 characters

Default

Blank

Web UI

Features->Forward&DND->Forward->AccountX->No Answer Forward->Off Code

[1]

X is the account ID. X=1-8.

Call Forward Synchronization for Server-side Configuration

Call forward synchronization feature provides the capability to synchronize the status of the call forward features

between the IP phone and the server.

If the call forward is activated in phone mode, the forward status changing locally will be synchronized to all registered

accounts on the server; but if the forward status of the specific account is changed on the server, the forward status

locally will be changed.

The following table lists the parameters you can use to configure call forward synchronization for server-side.

Parameter

features.feature_key_sync.enable

<y0000000000xx>.cfg

Description

It enables or disables to synchronize the feature status between the IP phone and the server.

Permitted Values

-Disabled

-Enabled, the IP phone send a SUBSCRIBE message with event “as-feature-event” to the server.

Default

Summary of Contents for W53P









































































































































































































































































Search results

Summary of Contents for W53P

Reviews:

Related manuals for W53P

Brands by name

Popular brands

Yealink W53P, Administrator'S Manual

Search results

Summary of Contents for W53P

Reviews:

Related manuals for W53P

Brands by name

Popular brands