Yealink W53H User Manual Download Page 93

Page: 93 / 108

| Connecting a Mobile Phone to your CP930W/CP935W via Bluetooth |

You have enabled the phone audio.

Procedure

Do the following on the phone:

•

Place a call. Tap , and then tap

Switch

to switch to the Bluetooth channel. Place a call or multiple

calls to the mobile contact.

On the CP935W, tap in the upper right corner to switch to the Bluetooth channel first and then tap

• Answer a call. An incoming call to your mobile phone is also shown on the phone, you can answer the

call on the phone.

• During the call, you can hold/resume, mute/unmute or end the call on the phone.

Editing Device Name of Your Phone

You can edit the device name of your phone for easily recognizable.

Before you begin

Make sure that the Bluetooth mode is activated.

Procedure

Select

Edit My Device Information

or go to

Menu

Settings

Basic Settings

Bluetooth

Edit My Device Information

On the CP935W, tap

Edit My Device Information

or go to

More

Basic

Bluetooth

Edit My

Device Information

The phone screen displays the device name.

Enter the desired name in the

Device Name

field.

Confirm the action.

Related tasks

Activating the Bluetooth Mode

Making the Phone Discoverable

If you make your phone discoverable to other Bluetooth devices, other Bluetooth devices can scan and find
your IP phone.

Before you begin

Make sure that the Bluetooth mode is activated.

Procedure

Select

Edit My Device Information

or go to

Menu

Settings

Basic Settings

Bluetooth

Edit My Device Information

On the CP935W, tap

Edit My Device Information

or go to

More

Basic

Bluetooth

Edit My

Device Information

Summary of Contents for W53H













































































































Search results

Summary of Contents for W53H

Reviews:

Related manuals for W53H

Brands by name

Popular brands

Yealink W53H, User Manual

Search results

Summary of Contents for W53H

Reviews:

Related manuals for W53H

Brands by name

Popular brands