Yealink W53H User Manual Download Page 89

Page: 89 / 108

| Audio Settings |

Procedure

Go to

Settings

Audio

Ring Tones

Melodies

On the CP930W, go to

Menu

Settings

Basic Settings

Sound

Ring Tones

On the CP935W, go to

More

Basic

Sound

Ring Tones

Common

On the DD phone, go to

Menu

Basic Settings

Sound

Ring Tones

Common

Select the desired ring tone for a specific line.

The ring tone is played automatically.

Confirm the action.

Silent Charging

You can enter silent mode when the handset is charging. When you exit charging, return to the volume
before charging. It is not applicable to DD phones/CP935W.

Procedure

Go to

Settings

Audio

On the CP930W, go to

Menu

Settings

Basic Settings

Sound

Press

Change

to select the

Silent Charging

check box.

Setting the Advisory Tone

Advisory tones are the acoustic signals of your handset, which inform you of different actions and states. It
is not applicable to DD phones.

About this task

You can configure the following advisory tones independently:

•

Keypad Tone

: plays when you press any key on the keypad. It is not applicable to CP935W.

•

Key Tone

: plays when you use the dialpad. It is only applicable to CP935W.

•

Touch Tone

: plays when you tap the keys (except the touch keypad). It is only applicable to CP930W/

CP935W.

•

Confirmation

: plays when a setting is changed or the handset is placed in the charger cradle. It is not

applicable to CP935W.

•

Low Battery

: plays when the battery's remaining capacity is low and the handset needs charging.

Note:

If the silent mode is activated, the advisory tones will not play, but you can still see the

alert of low battery on the phone screen.

Procedure

Go to

Settings

Audio

Advisory Tones

On the CP930W, go to

Menu

Settings

Basic Settings

Sound

Advisory Tones

On the CP935W, go to

More

Basic

Sound

Advisory Tone

Select the desired value from the

Keypad Tone

field.

On the CP935W, select the desired value from the

Key Tone

field.

On the CP930W/CP935W, select the desired value from the

Touch Tone

field.

Summary of Contents for W53H













































































































Search results

Summary of Contents for W53H

Reviews:

Related manuals for W53H

Brands by name

Popular brands

Yealink W53H, User Manual

Search results

Summary of Contents for W53H

Reviews:

Related manuals for W53H

Brands by name

Popular brands