Yealink VC400, Administrator'S Manual

Page: 237 / 299

System Management
221
Search Source List in Dialing
When you enter a few characters in the dialing screen, the system will search for contacts from
the enabled search source lists, and display the result in the dialing screen. The lists can be
History, Local Directory, Cloud Contacts and LDAP.
To match the desired list, you need to enable the search source list first. If you want to match the
LADP list, make sure LDAP is already configured. For more information on how to configure
LDAP, refer to
LDAP on page 214 .
To configure search source list in dialing via web user interface:
1.
Click on
Directory
->
Setting
.
2.
In the
Search Source List In Dialing
block, select the desired list from the
Disabled
column
and click .
The selected list appears in the
Enabled
column.
3.
Repeat step 2 to add more lists to the
Enabled
column.
4.
(Optional.) To remove a list from the
Enabled
column, select the desired list and then
click .
5.
To adjust the display order of the enabled list, select the desired list, and click
or .
6.
Click
Confirm
to accept the change.
Dual Screen
The VC400/VC120 has two display ports. When connecting only one display device to the
VC400/VC120 codec, Display1 port is the only available port. To make it easier for users to view
video images, users can connect two display devices to Display1 and Display2 ports respectively.
When two display devices are connected to the VC400/VC120 codec, the status bar of the
primary display device will display icon.