Yealink VC400, Administrator'S Manual

Page: 219 / 299

Configuring System Settings
203
To record video during a call via the video conferencing phone:
1.
Press the
Start REC
soft key to start recording and press the
Stop REC
soft key again to
stop recording.
When you start recording, the display device will show and the recording time. When you
stop recording, the recording icon disappears from the screen. The display device prompts
“Successfully video recording!”
Note
Screenshot
You can capture the screenshot from the camera via the remote control or web user interface.
Before capturing the screenshot, you need to insert a USB flash drive to the USB port on the
VC400/VC120 Codec to store screenshots. Make sure the USB feature is enabled.
The screenshot parameter on the system is described below.
Parameter Description Configuration Method
Screenshot
Enables or disables the screenshot
feature on the system.
Default:
Enabled
If it is set to Disabled, you cannot
capture screenshot.
Web User Interface
To configure screenshot via web user interface:
1.
Click on
Setting
->
Video & Audio
.
If you start recording during a call, both your display device and remote display devices will show
the icon on your video image.