Configuring System Settings
193
2.
Configure the camera settings.
3.
Click
Confirm
to accept the change.
To configure camera settings via the remote control:
1.
Select
Menu
->
Video & Audio->Camera General Settings
.
2.
Configure the camera settings.
3.
Press the
Save
soft key to accept the change.
Far-end Camera Control
Local video is displayed on the display device of the far site during a call. For the best view, you
can enable the Far Control Near Camera feature to allow the far site to control the focus and
angle of the local camera. You can also specify whether the far site is allowed to store and use
the local camera presets.
Far-end camera control parameters are described below.
Parameter
Description
Configuration Method
Not FECC in
call(0~300s)
Configures the duration time (in
seconds) when far site cannot
control the local camera during a
call.
Default:
15
Web User Interface
Summary of Contents for VC400
