Customizing the VC110 Video Conferencing Endpoint
79
During a video training for main office and branch office, both offices need to
hear the video sound, you can select this option.
6.
Press (Save soft key) to accept the change.
Audio input device is configurable via the web user interface at the path Setting->Video
& Audio->Audio Input.
Local video is displayed on the display device of the far site during a call. For the best
view, you can enable the Far Control of Near Camera feature to allow the far site to
control the focus and angle of the local camera. You can also specify whether the far
site is allowed to store and use the local camera presets.
You can configure the far-end camera control feature via the remote control or web user
interface.
Far-end camera control features you need to know:
Parameters
Description
Far Control of Near
Camera
Enables or disables the far-end to control the local
camera.
Far Set of Near Camera
Presets
Enables or disables the far-end to store the local camera
presets.
Far Move to Near
Camera Presets
Enables or disables the far-end to use the local camera
presets.
Note
If the remote endpoint enables the far-end camera control feature, you can control the
remote camera. For more information, refer to
on page
Summary of Contents for VC110
