Yealink VC110, User Manual

Page: 86 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
74
You can configure the uplink and downlink bandwidth of the endpoint via the remote
control or web user interface.
Note
To configure the uplink and downlink bandwidth via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Call Features menu.
3. Press or to scroll to Bandwidth Settings, and then press .
4. Select desired bandwidth from the pull-down list of Uplink Bandwidth.
If Auto is selected, the endpoint will negotiate the appropriate bandwidth
automatically.
5. Select desired bandwidth from the pull-down list of Downlink Bandwidth.
If Auto is selected, the endpoint will negotiate the appropriate bandwidth
automatically.
6. Press (Save soft key) to accept the change.
Bandwidth is configurable via the web user interface at the path Setting->Call
Features->Uplink Bandwidth/Downlink Bandwidth.
You can configure video size mode for the VC110 video conferencing endpoint
according to current network environment.
The actual resolution depends on the performance of the remote endpoint, and is
affected by the quality of the communication channel.