Yealink VC110, User Manual

Page: 84 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
72
If the call history is more than one page, you can press or to turn pages.
4. Press (Add to Contact soft key).
5. Enter contact name in the Name field.
You can add more than one number for the contact. For more information, refer to
Adding Contacts on page 58 .
6. Press (Save soft key) to save the contact.
Call history management feature is configurable via the web user interface at the path
Directory->History.
The VC110 video conferencing endpoint supports SIP and H.323 call protocols. H.323 is
commonly used to communicate to other video conferencing endpoints. SIP is
commonly used to communicate with other VoIP devices. You can configure which
protocol is to be used when the endpoint is making calls. When the Auto call protocol is
used, the endpoint preferentially uses the H.323 protocol to place calls. If there is no
available H.323 account on the endpoint, the endpoint will switch to the SIP protocol.
You can also specify the desired protocol for the endpoint to place calls via the remote
control or web user interface.
Note
Before configuring call
protocol
, ensure the remote endpoint supports the call
protocol
too. For more information, contact your system administrator.