Yealink VC110, User Manual

Page: 59 / 159

Customizing the VC110 Video Conferencing Endpoint
47
To configure the backlight of the video conferencing phone via the web user interface:
1. Click on Setting->General.
2. Select the desired value from the pull-down list of Backlight Time.
3. Click Confirm to accept the change.
Site name is displayed on the status bar of the display device and video conferencing
phone. You can make an IP address call to the other party, the endpoint site name will
be displayed on the remote display device. Site names can consist of letters, numbers
or special characters.
Site name is configurable via the remote control or web user interface.
To configure the site name via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Basic menu.