Yealink VC110, User Manual

Page: 58 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
46
To configure the automatic sleep time via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Basic menu.
3. Press or to scroll to Automatic Sleep Time, and then press .
4. Select desired time from the pull-down list of Automatic Sleep Time.
If Always On is selected, the endpoint will not enter the sleep mode automatically.
5. Press (Save soft key) to accept the change.
Automatic sleep time is configurable via the web user interface at the path
Setting->General->Automatic Sleep Time.
The backlight of the video conferencing phone is always on by default. You can
configure backlight time for the video conferencing phone‟s LCD screen via the web
user interface.
You can configure the LCD screen„s backlight time in the following formats:

Always On: Backlight is on permanently.

15s, 30s, 1Min, 2 Min, 5 Min, 10 Min, 30 Min: Backlight goes out when the phone has
been inactive for the time you set.