Yealink VC110, User Manual

Page: 43 / 159

Getting Started
31
4. Lock the L-bracket to the wall with T4× 30 screws.
5. Connect one end of the DVI cable to the VC110 all-in-one unit and put the other end
of the DVI cable through the L-bracket.
6. Lock the VC110 all-in-one unit to the L-bracket, and then connect the other end of
the DVI cable to the cable hub.
Do the following:
1. Open the battery cover on the back of the remote control.
2. Insert the batteries with the correct polarity.