Yealink VC110 User Manual Download Page 28

Page: 28 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint

Name

Description

①

Built-in Microphones

Support 360-degree audio pickup at a radius of up to
3 meters.

②

Mute Button

Mutes or unmutes the VCM30. For more information on
the mute indicator LED, refer to

LED Instructions

page

③

Audio Out Port

Connects to the Audio In port of cable hub using the
7.5m Ethernet cable labeled Audio In.
Provides the power supply for the VCM30.

For more information on how to use VCM30 video conferencing microphone array, refer
to

Using the VCM30 Video Conferencing Microphone Array

on page

119

The VCR10 remote control provides 3 shortcut keys. It can help users to organize
conference easily with intuitive and efficient operation in all screens.

Summary of Contents for VC110
































































































































































Search results

Summary of Contents for VC110

Reviews:

Related manuals for VC110

Brands by name

Popular brands

Yealink VC110, User Manual

Search results

Summary of Contents for VC110

Reviews:

Related manuals for VC110

Brands by name

Popular brands