Yealink VC110, User Manual

Page: 124 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
112
The VCM60 supports two standby modes: online standby and offline standby.
Online standby:

When registering with dongle successfully, the VCM60 enters online standby mode
and the mute indicator LED changes to green and is in breathing state.
Offline standby:

If VC110 video conferencing endpoint encounters poor signal, wireless interference
or is powered off, the VCM60 may lose connection with the dongle. In this case, the
VCM60 will search the dongle again, and the mute indicator LED fast flashes green.
If dongle cannot be searched in 2 minutes, the VCM60 will enter offline standby
mode automatically and the mute indicator LED slowly flashes orange.

If VC110 video conferencing endpoint starts when the VCM60 is in offline standby
mode, you need to tap the mute button to activate VCM60 to search dongle again.
There is a mute button on the top of the VCM6. If VCM60 works as the audio input device
of the VC110 video conferencing endpoint, you can mute or unmute it in the following
scenarios:

If you do not want to have your voice broadcast during a conference, you can tap
mute button to mute the VCM60.

If you want to speak again during a conference, you can tap mute button to
unmute the VCM60.
To mute the VCM60 during a call:
1. Tap again to un-mute the call.
The mute indicator LED illuminates solid red. And the mute icon appears on
the local video image.
To un-mute the VCM60 during a call:
1. Tap again to un-mute the call.
The mute indicator LED illuminates solid green. And the mute icon disappears
from the local video image.
When the dongle is connected to the USB port of the VC110 all-in-one unit, you can view
VCM60 status via remote control or web user interface.