Yealink VC110, User Manual

Page: 122 / 159

User Guide for Yealink VC110 Video Conferencing Endpoint
110
There is a power switch on the bottom of the VCM60. Turn on the power switch to start
the VCM60. After the VCM60 starts, it registers with the paired dongle automatically. You
can turn off this switch if the VCM60 is not in use for a long period of time.
To ensure good voice quality, VCM60 video conferencing wireless microphone can be
connected to the VC110 video conferencing endpoint to act as the audio input device.
To connect the VCM60 to the VC110 video conferencing endpoint, do the following:
1. Connect the dongle to one of the USB ports on the VC110 all-in-one unit.
The display device prompts “Dongle connected!”, and the (unregistered)
icon appears on the status bar.