Yealink VC110, Administrator'S Manual

Page: 238 / 268

Administrator‘s Guide for Yealink VC110 Video Conferencing Endpoint
226
To reset the endpoint via the rest key on the VC110 all-in-one unit:
Using tiny objects (for example, the paper clip) to press and hold the reset button for 15
seconds until the screen turns black.
Do not power off the endpoint during the factory restore process. The endpoint reverts
to the default factory settings and restarts automatically. This will take a few minutes.
SNMP (Simple Network Management Protocol) is an Internet-standard protocol for
managing devices on IP networks. It is used mostly in network management endpoints
to monitor network-attached devices for conditions that warrant administrative
attention. SNMP exposes management data in the form of variables on the managed
endpoints, which describe the endpoint configuration. These variables can then be
queried (and sometimes set) by managing applications. The variables accessible via
SNMP are organized in hierarchies, which are described by Management Information
Bases (MIBs).
Yealink endpoints support SNMPv1 and SNMPv2. They work as SNMP clients, receiving
requests from the SNMP server. The SNMP server may send requests from any available
source port to the configured port on the client, while the client responds to the source
port on the SNMP server. Yealink endpoints only support the GET request from the SNMP
server.
You can download SNMP application to monitor and manage information on a network
entity.
The following table lists the basic object identifiers (OIDs) supported by the endpoint.
MIB OID Description
YEALINK-MIB
1.3.6.1.2.1.37459.2.1.
1.0
The textual identification of the contact
person for the endpoint, together with the
contact information.
For example, Sysadmin (root@localhost)
YEALINK-MIB
1.3.6.1.2.1.37459.2.1.
2.0
An administratively-assigned name for
the endpoint. If the name is unknown, the
value is a zero-length string.