| Wireless Network |
79
Adding a Wireless Network manually
If your gateway/router has SSID broadcast disabled, it might not appear in the scanning results. In that case, you must
manually add a wireless network.
Before you begin
Make sure Wi-Fi Mode is enabled.
Procedure
1.
Navigate to
Menu
>
Setting
>
Basic
>
Wi-Fi
.
2.
Tap
More
>
Add
.
3.
Enter the SSID and then select a security mode from the drop-down menu of
Security Mode
:
• If you select
None
, tap
Save
.
• If you select
WEP
or
WPA
/
WPA2-PSK
, enter the password and then tap
Save
.
• If you select
802.1×EAP
, select a desired
EAP method
,
Phase-2 authentication
and
CA certificate
, enter the
desired values in the
Identity
,
Anonymous identity
and
Password
fields and then tap
Save
.
If you tap the
Show advanced options
radio box, select a desired value in the
Proxy
field; If you select
Manual
,
enter the information about proxy server in the corresponding fields.
Related tasks
Viewing the Wireless Network Information
After connecting to the wireless network, you can view the wireless network information (such as wireless status,
profile name, SSID, signal strength and so on.)
Procedure
Navigate to
Menu
>
Setting
>
Basic
>
Wi-Fi
>
Wireless Status
.
Related tasks
Connecting to the Wireless Network
Disconnecting the Wireless Network Connection
Procedure
1.
Navigate to
Menu
>
Setting
>
Basic
>
Wi-Fi
.
2.
Tap the connected wireless network.
3.
Tap
Forget
from the pop-up menu.
The wireless network is disconnected. You can tap it again to connect.
Deactivating the Wi-Fi Mode
You should deactivate the Wi-Fi mode when you need to connect your phone to the wired network.
Procedure
1.
Navigate to
Menu
>
Setting
>
Basic
>
Wi-Fi
.
Summary of Contents for T58A Skype for Business
Page 1: ......
