Yealink T48S Skype For Business Edition, User Manual

Page: 65 / 254

Customizing Your Phone
63
To configure the screen saver via phone user interface
:
1.
Tap
Menu->Setting
->
Basic
->
Display
->
Screensaver
.
2.
Select the desired time from the pull-down list of
Wait Time
.
3.
Tap the desired radio box of the
Display Clock
field.
4.
Select the desired screen saver type from the pull-down list of
Screensaver Type
.
This field is configurable only if you have uploaded a custom picture via web user
interface.
– If you select
System
.
The phone will automatically set the built-in picture as the screen saver.
– If you select
Custom
.
The phone will automatically set the custom pictures you upload as the screen savers,
and display these pictures alternately.
5.
Tap to accept the change.
Screen saver is configurable via web user interface at the path
Settings
->
Preference
.
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The
phone enters power-saving mode after it has been idle for a certain period of time. In power-
saving mode, the power LED glows red for 500ms and is in the off state for 3s alternately.
The phone will exit power-saving mode if one of the following phone events occurs:

Press any key.

Tap the touch screen.

Pick up/hang up the handset.

Receive an incoming call.

A new prompt (e.g., someone adds you as a delegate or you add someone to be your