Yealink T48G, Administrator'S Manual

Page: 449 / 622

Security Features
429
“static.auto_provision.local_calllog.backup.enable”. The plaintext AES key is configured
by the parameter “static.auto_provision.aes_key_16.mac”.
Default 0
Parameter static.auto_provision.encryption.config <y0000000000xx>.cfg
Description
It enables or disables the IP phone to encrypt <MAC>-local.cfg file using the plaintext
AES key.
Permitted
Values
0-Disabled, the MAC-local CFG file will be uploaded unencrypted and will replace the
one (encrypted or unencrypted) stored on the server if you have configured to back
up the MAC-local CFG file to the server by the parameter
“static.auto_provision.custom.sync”.
1-Enabled, the MAC-local CFG file will be uploaded encrypted and will replace the one
(encrypted or unencrypted) stored on the server if you have configured to back up the
MAC-local CFG file to the server by the parameter “static.auto_provision.custom.sync
”
.
The plaintext AES key is configured by the parameter
“static.auto_provision.aes_key_16.mac”.
Default 0
[1]
X is activation code ID. For all IP phones, X=1-50.
[2]
If you change this parameter, the IP phone will reboot to make the change take effect.
Example: Encrypting Configuration Files
The following example describes how to use “Config_Encrypt_Tool.exe” to encrypt the account.cfg file.
For more information on the other two encryption tools, refer to
Yealink Configuration Encryption Tool
User Guide .
The way the IP phone processes other configuration files is the same to that of the account.cfg file.
Procedure:
1.
Double click “Config_Encrypt_Tool.exe” to start the application tool.
The screenshot of the main page is shown as below: