Yealink T48G, Administrator'S Manual

Page: 106 / 622

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
86
Permitted
Values
URL within 511 characters
Default
Blank
Web UI Settings->Auto Provision->Server URL
Parameter static.auto_provision.server.username <y0000000000xx>.cfg
Description It configures the user name for provisioning server access.
Permitted
Values
String within 32 characters
Default
Blank
Web UI Settings->Auto Provision->User Name
Parameter static.auto_provision.server.password
<y0000000000xx>.cfg
Description It configures the password for provisioning server access.
Permitted
Values
String within 32 characters
Default
Blank
Web UI Settings->Auto Provision->Password
Configuring a Provisioning Server
The provisioning server can be set up on the local LAN or anywhere on the Internet. Use the following
procedure as a recommendation if this is your first provisioning server setup.
To set up the provisioning server:
1.
Install a provisioning server application or locate a suitable existing server, such as 3CDaemon.
2.
Create an account and home directory.
3.
Set security permissions for the account.
4.
Create boot files and configuration files, and then edit them as desired.
5.
Copy the boot files, configuration files and resource files to the provisioning server.
6.
If performing static provisioning, obtain the provisioning server address.
Tip
Typically, all phones are configured with the same server account, but the server account provides a means
of conveniently partitioning the configuration. Give each account a unique home directory on the server and
change the configuration on a per-line basis.