User Guide for the T48G Skype for Business phone
206
To set up the Yealink BToE connector
:
Right-click in the system tray, you can do the following:
Click
Show/Hide(S)
, the Yealink BToE Connector interface will be shown or hidden.
Click
Pair & Sign in(G)
, you can pair your phone with your Skype for Business client.
Click
Sign in by Lync(L)
, after your phone pairs with Skype for Business client, but your
phone and Skype for Business client are signed into with different user accounts, you can
use BToE to sign into the Skype for Business client and the connected phone with the same
account. For more information, refer to
on page
Click
Settings(P)
, you can set up the Yealink BToE Connector, and then click
OK
to save.
Click
About(A)
, you can view the information of Yealink BToE Connector.
Click
Exit(E)
, you can close the software.
Enabling Better Together over Ethernet
You need to pair your phone with your Skype for Business client to enable BToE. This section
provides information on how to pair your phone with the Skype for Business client.
