Yealink T46S Skype for Business, User Manual

Page: 108 / 234

User Guide for the T46S Skype for Business phone
94
Ending Calls
To end a call:
Do one of the following:
- If you are using the handset, press , the
EndCall
soft key or hang up the handset.
-
If you are using the headset, press or the
EndCall
soft key.
-
If you are using the speakerphone, press or , or the
EndCall
soft key.
Note
Call Mute
You can mute the microphone of the active audio device during an active call, and then the
other party cannot hear you. Call mute applies to all modes (Handset, Headset and
Speakerphone).
To mute a call:
1.
Press during an active call.
The LCD screen indicates that the call is muted. The mute key LED glows red when the call
is muted.
To un-mute a call:
1.
Press again to un-mute the call.
Call Hold/Resume
You can place an active call on hold. Only one active call can be in progress on the phone at
any time. Other calls can be made and received while placing the original call on hold. If
Music
on Hold
feature is enabled, the phone will play music to the callers who has been placed on
hold. For more information, please refer to Music on Hold on page 95 .
When a call is placed on hold, you cannot press to end it. You should press the
Resume
soft key
to resume the call, and then press to end it.