Set up and use of Yealink T19, T2- and T4 -series phones on the Cloud PBX server
4
Enter the registration details for the Cloud service
Go to the Register page, under the Account tab, and enter the SIP registration
details: Server Host, Register Name, User name and Password.
These registration details can be obtained from the cloud PBX administrator. The
Register Name and the User Name should be the same. This is referred to as the IP
Registration Name on the IP Phone Registration page of the cloud PBX installer
portal. Alternatively these credentials may be auto-provisioned by a provisioning
server.
Ensure the Line Active is set to Enabled.
The Register Status should change to Registered after the Phone successfully
connects to the PBX.
