Yealink IP Phones Configuring Guide
4
Configuring a Static IPv4 Address
To configure a static IPv4 address via CommPortal phone configurator:
1.
Click
Network->IP Setting.
Make sure that the IP addressing mode is configured as
IPv4
or
IPv4 & IPv6.
2.
Select
Static IP Address
from the
drop-down menu of
Internet Port Type for IPV4
.
3.
Enter the desired values in the
Static IP Address
,
Subnet Mask
,
Gateway
,
Primary DNS
and
Secondary DNS
fields respectively.
4.
Press the
Save
soft
key to accept the change.
5.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
Configuring a Static IPv6 Address
It is not applicable to W80B.
To configure a static IPv6 address via CommPortal phone configurator:
1.
Click
Network >IP Setting.
Make sure that the IP addressing mode is configured as
IPv6
or
IPv4 & IPv6.
2.
Select
Static IP Address
from the
drop-down menu of
Internet Port Type for IPV6
.
Summary of Contents for T19P-E2
Page 1: ......
Page 6: ...Yealink IP Phones Configuring Guide vi...
Page 12: ...Yealink IP Phones Configuring Guide 2...
Page 48: ...Yealink IP Phones Configuring Guide 38...
