Yealink SIP VP-T49G, User Manual

Page: 160 / 317

User Guide for SIP VP-T49G IP Phone
160
Placing Calls
You can dial using the phone number/SIP URI/IP address/name (User Name for SIP account,
H.323 Name for H.323 account). The maximum SIP URI length is 32 characters. For example, SIP
URI: 3606@sip.com. For more information on IP call, refer to
Direct IP Call on page 297 . The
following describes how to place a call using the phone number.
You can place a call in one of three ways using your SIP VP-T49G IP phone:
-
Using the handset
-
Using the speakerphone
-
Using the headset
You can also dial the number first, and then choose the way you want to speak to the other
party.
Note
You can also dial an entry/contact from call history, local directory or remote phone book. For
more information, refer to
Contact Management on page 87 and Call History Management on
page 111 .
By default, you can set up a video call with the other party that is video-enabled. The IP phone
can set up video calls with only two parties (even if more than two parties that set up a call with
you can send video). To place an audio-only call, make sure the video feature is disabled. For
more information, refer to
Changing the Video Settings on page 172 .
During a call, you can alternate between Speakerphone, Headset, and Handset modes by
pressing the Speakerphone key, the HEADSET key, or by picking up the handset.
If you want to place a call to a Yealink Cloud contact who is in the same enterprise directory as
you, you can enter the extension (the last four Cloud number). If you want to place a call to a
Cloud contact who is in different enterprise directory from you, you should enter 9-digit Cloud
number.