Yealink SIP VP-T49G, User Manual

Page: 150 / 317

User Guide for SIP VP-T49G IP Phone
150
()
The parentheses "( )" can be used to group together patterns, for instance, to
logically combine two or more patterns. Example:
"([1-9])([2-7])3" would match "
92
3", "
15
3", "
77
3", etc.
$
The “$” should be followed by the sequence number of a parenthesis. The “$”
plus the sequence number means the whole character or characters placed in
the parenthesis. The number directs to the right parenthesis when there are
more than one. Example:
A replace rule configuration, Prefix: "001(xxx)45(xx)", Replace: "9001$145$2".
When you dial out "0012354599" on your phone, the IP phone will replace the
number with "9001
235
45
99
". “$1” means 3 digits in the first parenthesis, that
is, “235”. “$2” means 2 digits in the second parenthesis, that is, “99”.
Note
Replace Rule
You can configure one or more replace rules (up to 100) to remove the specified string and
replace it with another string. You can configure a pattern with wildcards (refer to the expression
syntax in the table above), so that any string that matches the pattern will be replaced. This
feature is convenient for you to dial out a long number. For example, a replace rule is configured
as “Prefix: 1” and “Replace: 1234”, when you try to dial out the number “1234”, you just need to
enter “1” on the phone and then tap
Send
.
To add a replace rule via web user interface:
1.
Click on
Settings
->
Dial Plan
->
Replace Rule
.
2.
Enter the string (e.g., 1) in the
Prefix
field.
3.
Enter the string (e.g., 1234) in the
Replace
field.
4.
Enter the desired line ID in the
Account
field or leave it blank.
5.
Click
Add
to add the replace rule.
Dial plan is configurable via web user interface only.