Yealink SIP-T56A, User Manual, Page: 293 / 361

Basic Phone Features
293
4.
Enter the conference URI (e.g., conference@example.com) in the
Conference URI
field.
5.
Click
Confirm
to accept the change.
Note
To set up a network conference call:
1.
Place a call to the first party.
2.
Tap the
Conference
soft key to place a new call.
The active call is placed on hold.
3.
Enter the number of the second party and press or tap
Conference
.
4.
When the second party answers the call, tap the
Conference
soft key to add the second
party to the conference.
5.
Tap the
Conference
soft key to place a new call.
The conference call is placed on hold.
6.
Enter the number of the new party and then press or tap
Conference
.
7.
When the new party answers the call, tap the
Conference
soft key to add the new party to
the conference.
8.
Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different from
introduced above. Contact your system administrator for more information.
Call Park
You can use call park to place a call on hold, and then retrieve the call from another phone in
Network conference is configurable via web user interface only.