Yealink SIP-T56A, User Manual, Page: 117 / 361

Customizing Your Phone
117
To configure incoming/outgoing call lookup and update time interval via web user
interface:
1.
Click on
Directory
->
Remote Phone Book
.
2.
Select
Enabled
from the pull-down list of
Incoming/Outgoing Call Lookup
.
3.
Enter the desired refresh period in the
Update Time Interval(Seconds)
field.
The default value is 21600.
4.
Click
Confirm
to accept the change.
Mobile Contacts
The first time your IP phone pairs and connects to your Bluetooth-enabled mobile phone, you
will be asked if you would like to sync phone contacts temporarily. If allowed, the phone
contacts will be imported to the mobile contacts directory of your IP phone. For more
information, refer to
Bluetooth-Enabled Mobile Phone on page 137 .
You can add a contact to the local directory or blacklist directory from mobile contacts. You
cannot add a contact to the mobile contacts directory on your IP phone.
Note
For operating instructions on placing calls to and/or searching for contacts in the mobile
contacts directory, refer to the operating instructions of
Placing Calls to Contacts on page 109
and/or Searching for Contacts on page 110 .
To add a contact to the local directory from mobile contacts directory:
1.
Tap ->
Mobile Contacts
.
2.
Drag up and down to view the list of Mobile Contacts.
If you disconnect the Bluetooth-enabled mobile phone from IP phone or disable the IP phone to
sync phone contacts, the mobile contacts directory will disappear.