Call Features
354
0 to 2 (for T21(P) E2)
0, 1 (for CP920)
Default
Blank
Supported
Devices
All phones except T19(P) E2
Web UI
Settings > Dial Plan > Replace Rule > Account
Parameter dialplan_replace_rule.url
<y0000000000xx>.cfg
Description
It configures the access URL of the replace rule template file.
For customizing replace rule template file, refer to
Replace Rule File Customization
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
URL within 511 characters
Default
Blank
[1]
X is from 1 to 100.
Dial Now Configuration
You can configure dial now rules either one by one or in batch using a dial now template.
The following table lists the parameters you can use to configure the dial now.
Parameter dialplan.dialnow.rule.X
[1]
<y0000000000xx>.cfg
Description
It configures the dial now rule (the string used to match the numbers entered by the user).
When entered numbers match the predefined dial now rule, the phone will automatically dial out the
numbers without pressing the send key.
Example:
dialplan.dialnow.rule.1 = 123
Note: It works only if “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 511 characters
Default
Blank
Web UI
Settings > Dial Plan > Dial Now > Rule
Parameter dialplan.dialnow.line_id.X
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the dial now rule.
The digit 0 stands for all lines. If it is left blank, the dial-now rule will apply to all lines on the phone.
Note: Multiple line IDs are separated by commas. It works only if “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
0 to 16 (for T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G)
0 to 12 (for T53W/T53/T43U/T42U/T42S/T42G)
0 to 6 (for T41P/T41S/T27G)
0 to 3 (for T40P/T40G/T23P/T23G)
