Yealink SIP-T48S User Manual Download Page 142

Page: 142 / 159

Yealink T4 Series IP Phones User Guide

138

The IP phone will prompt the connect passkey on the LCD screen, as shown below:

Make sure your mobile phone is showing the same passkey, and then press

on both mobile phone and IP

phone.

A message is displayed on the LCD screen:

(Optional.) Press

to enable the mobile contacts sync feature and the IP phone will sync the mobile contacts tem-

porarily, or press

Cancel

to disable mobile contacts sync feature and the IP phone will not sync the mobile con-

tacts.

Note

If you enable mobile contacts sync feature, you also need to authorize the IP phone to sync the contacts temporarily on the

mobile phone.

Related Topics

Activating the Bluetooth Mode

Syncing the Mobile Contacts to the IP Phone

Syncing the Mobile Contacts to the IP Phone

You can sync mobile contacts to your IP phone. This is a convenient way to view a contact without accessing your

mobile phone.

Topics

Enabling the Mobile Contacts Sync Feature

Viewing your Mobile Contacts on the IP Phones

Disabling the Mobile Contacts Sync Feature

Enabling the Mobile Contacts Sync Feature

Before You Begin

Summary of Contents for SIP-T48S
































































































































































Search results

Summary of Contents for SIP-T48S

Reviews:

Yealink SIP-T48S, User Manual, Page: 142 / 159

Search results

Summary of Contents for SIP-T48S

Reviews: