Yealink SIP-T48S, User Manual, Page: 120 / 159

Yealink T4 Series IP Phones User Guide
116
Topics
Performing a Blind Transfer
Performing a Semi-attended/Attended Transfer
Performing a Blind Transfer
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Blind Transfer .
Procedure
1. During a call, press the BLF key of the monitored line which you want to transfer this call to.
Performing a Semi-attended/Attended Transfer
Before You Begin
Check with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer .
Procedure
1. During a call, press the BLF key of the monitored line which you want to transfer this call to. The phone will dial out
the number of the monitored line.
2. Press the BLF key of the monitored line again or Transfer ( Trans ) to complete the transfer when the monitored user
receives ringback or after the monitored user answers the call.
Parking/Retrieving a Call by BLF Key
You can use the BLF key to park a call or retrieve a parked call directly.
Note
Check with your system administrator to find out if it is available on your phone.
Topics
Parking a Call
Retrieving a Parked Call
Parking a Call
Before You Begin
Your system administrator has set call park feature in the FAC mode in advance.
Procedure
1. During a call, press Park (You may need to press the More soft key to see the Park soft key).
2. Press the desired BLF key to park the call to the monitored line.
On the SIP-T48S/T48G IP phone, tap to back to the Idle screen, and then tap the desired BLF key to park the call
to the monitored line.
Retrieving a Parked Call
Before You Begin